Mud Cleaner-Xi'an Huayang Oil & Gas Equipment Co., Ltd.

Mud Cleaners are designed to concentrate most of the solids being circulated through a mud system to a small enough volume to be handled by a fine mesh screen. In this way, much finer screening can be done with the Mud Cleaner than the primary shaker, which must handle the entire circulating volume.

The solids discard rates from the hydrocyclones is relatively low compared to the shaker capacity. This enables fine mesh screens to be used, minimizing the fine solids returned to the active fluid system. Long beach lengths on the shaker enable a high fluid recovery rate.

Mud Cleaner is designed to be used as a secondary solids removal unit. Primary removal equipment such as a fine screen shaker should be installed upstream of the Mud Cleaner. The utilization of these primary units greatly improves the operation efficiency of the Mud Cleaner by removing the larger sized solids.