Desander Cyclone

Desander cyclone is an important part of desander and desilter, which is used to remove remaining cuttings larger than barite. When barite is added to drilling fluids, the bottom desilter passes through 100~325 mesh screen, thus can recover most barite and also can continuously remove drill cuttings larger than mesh.

Desander cyclones: 500GPM, separates solid-phase 45~75μm.

Desilter cyclones: 80 GPM, separates solid phase 15 ~45μm.

Working Principle

The basic principle of cyclone desander is to use centrifugal force to introduce fluid tangentially into the conical shell of the desander cyclone, and the action of gravity pushes the solid phase to the cone surface and runs down the surface to the separator for discharge mouth discharge. The secondary liquid swirl action generated in the separator shell will generate upward movement force, and then the liquid will be discharged from the discharge manifold through the swirl detector. The smaller diameter of the sand removal cyclone is, the greater the separation effect will be so that solid particles with smaller particle sizes can be successfully separated.

As a professional manufacturer of desander, HYANG can supply 8", 10", 12", 14", and 20" desander cyclones. Our desander cyclones are available for different materials, such as ceramic cyclones, polyurethane cyclones, cast iron cyclones, etc. Our desander hydrocyclones are effective on both oil-base and water-base weighted and unweighted drilling fluid systems, it’s widely used in oil and gas drilling solids control systems, horizontal directional drilling mud cyclones, and shield muddy water separation cyclone treatment.

Hot Tags: desander cyclone, China, suppliers, manufacturers, factory, customized, buy, price, pricelist, quotation, for sale